Janome Magnolia 7330@ How to Wind a Bobbin

When I saw tiny holes on both sides of the bobbin, I thought they were just for decoration. I usually winded the thread around the bobbin before I put the bobbin on the bobbin winder spindle. Actually, the holes help you to wind the bobbins without winding several times by hands. hahaha. 

Here is the way threading for bobbin winding.

1. Set the speed control slide at max
   
2. Pass the thread through the hole from the inside to the outside
   
3. Put the bobbin on the bobbin winder spindle
   
4. Push the bobbin winder spindle to the right
   
5. Hold the free end of the thread and press depress the foot control
   
6. Stop the machine after the bobbin has spun several times. 
   
7. Cut the thread close to the hole in the bobbin.
   
8. Depress the foot control again. when the bobbin is fully wound, it will stop automatically.
   
9. Release the foot control. Push the bobbin winder spindle to the left.
   
10. Cut the thread, & move the bobbin.
    
    

Hana